DCA - Clear Aligner & Retainer Resin

1st FDA Class II 510K tough biocompatible fast

Print Clear & Transparent with Digital Polishing™

DCA Technical Datasheet

Mechanical Properties Of DCA

LuxCreo's printing solutions can directly print clear aligners that require minimal post-processing steps.

01_DCA

With the Lux 3D+ printing solution, dental labs and practices can produce eight aligners in a little over an hour using a four-step process:

  1. Print the aligners

  2. Wash the aligners with LuxWash

  3. Dry aligners

  4. UV cure the aligners using the LuxCure station Buff off any support structures from the aligners

Flexural Strength

MPa

Flexural Modulus

MPa

Ultimate Tensile Strength

MPa

Tensile Modulus

MPa

Shore D Hardness

MPa

Elongation at Break

%

Direct Print Aligner Workflow​

Validated direct print, same-day clear aligner workflow​.

Design

Load

Print

Wash&Cure

First FDA cleared 510 (k) Class II direct print aligner workflow.