3D Printed Nightguards: Same-Day Workflow Guide | LuxCreo
Application Workflow Guide

3D Printed Nightguards: Step-by-Step Workflow

How to produce same-day nightguards and occlusal splints in-house on the iLux Pro Dental: scan, design, print, wash and cure, and finish, with the equipment and materials each step needs.

Direct Answer

How is a nightguard 3D printed?

A 3D printed nightguard is designed from intraoral scans of both arches and a bite record, then printed in a nightguard resin such as LuxCreo DNG. After printing it is washed, cured, and lightly finished. With AI-generated designs taking about five minutes and LuxCreo’s Digital Polishing™ cutting manual finishing, a practice can deliver a nightguard the same day.

The Workflow

Scan, design, print, wash and cure, finish

The doctor handles diagnosis, bite records, and design approval. Trained staff can run the rest, using the same printer and software as other in-house appliances.

  1. Step 1

    Scan

    Take intraoral scans of the upper and lower arches and record the bite. Upload them to LuxCloud Dental or your design software.

  2. Step 2

    Design

    LuxCreo’s AI-powered design generates a nightguard in about five minutes. Complex cases can go to LuxCreo technicians for manual design. The doctor approves the design before printing.

  3. Step 3

    Prepare the print

    Import the design into LuxFlow, which adds supports in one click and places the nightguards on the build platform.

  4. Step 4

    Print

    Print in DNG resin on the iLux Pro Dental, the same printer used for direct-print aligners.

  5. Step 5

    Wash and cure

    Clean off uncured resin in the iLuxWash Dental, then post-cure in the iLuxCure Pro using the DNG settings.

  6. Step 6

    Finish and deliver

    Remove supports and check clarity. Digital Polishing™ leaves less manual polishing to do. After a final fit check, the nightguard is delivered the same day.

Equipment & Materials

What you need for in-house nightguards

Nightguard workflow: equipment and materials
StepEquipment or materialNotes
ScanIntraoral scannerBoth arches plus a bite record
DesignLuxCreo AI-powered or manual design serviceAI designs in about five minutes
Case managementLuxCloud DentalUpload, track, and share cases
Print preparationLuxFlowOne-click supports and nesting
PrintiLux Pro DentalDLP printer, 50-micron resolution
ResinLuxCreo DNG nightguard resinPartner options: Keystone KeySplint Soft, Glidewell Tuffsplint
WashiLuxWash DentalRemoves uncured resin
CureiLuxCure ProPost-cure with DNG settings
FinishLight polishing toolsDigital Polishing™ reduces manual work
The Resin

DNG nightguard resin at a glance

Strength

39 MPa tensile strength

Ultimate tensile strength of 39 MPa, with 14% elongation at break, so the appliance can flex slightly without cracking.

Heat resistance

71.6°C heat deflection

Heat deflection temperature measured at 0.455 MPa (ASTM D648).

Yield

About 80 per bottle

LuxCreo states that one bottle of DNG makes about 80 nightguards. DNG is clear and indicated for nightguards and occlusal splints.

Values from LuxCreo’s published DNG data (see the DNG technical data sheet). Properties vary with print orientation, settings, and post-processing.

Quality Checks

Getting a clear, comfortable nightguard

Accurate bite record

The occlusal surface is only as good as the bite record. Capture it carefully before design.

Supports off the fitting surface

Keep supports on outer surfaces so the side that seats on the teeth stays smooth.

Cure fully, check clarity

Use the validated cure settings, then check clarity and finish before the fit check.

FAQ

Nightguard printing questions

What resin is used to 3D print nightguards?

On the iLux Pro Dental, nightguards are printed in LuxCreo DNG, a clear resin for nightguards and occlusal splints with 39 MPa ultimate tensile strength and 14% elongation at break. Keystone KeySplint Soft and Glidewell Tuffsplint are also validated partner resins.

Can a practice deliver a nightguard the same day?

Yes. With scans taken at the appointment, an AI-generated design in about five minutes, and in-house printing, washing, and curing on the iLux Pro Dental, the nightguard can be finished and delivered in the same day.

What is Digital Polishing™?

Digital Polishing™ is LuxCreo’s process for DNG nightguards that reduces manual finishing. LuxCreo states it eliminates 90% of finishing time, so staff spend far less time polishing each appliance.

How many nightguards does one bottle of resin make?

LuxCreo states that one bottle of DNG resin makes about 80 nightguards. Actual yield depends on appliance size, thickness, and supports.

Can staff run nightguard production?

Yes. The doctor handles diagnosis, bite records, design approval, and seating. Trained staff can review AI designs, set up prints in LuxFlow, run the printer, and handle washing, curing, and finishing.

Next Step

Offer same-day nightguards

A LuxCreo specialist can walk you through the nightguard workflow on the iLux Pro Dental and how it fits with your other in-house applications.

This guide describes a general workflow and reflects information published by LuxCreo at the time of writing. It is not clinical guidance. Diagnosis and appliance approval are the clinician’s responsibility. Follow the instructions for use for every material and device, and confirm current details with LuxCreo.